Basic technical parameters:
Can be equipped with shoulder strap for easy carrying various lengths of
Power: 650W output power atomization: 105W
Pot Capacity: 800mL tube length: 1.5 m
Motor speed: 32000rpM Weight: 1.9kg
Specifications 650W maximum output pressure of 0.1-1 (MPa)
Maximum injection flow rate 1000 (L / min) optimal spray distance 100-400 (mm)
Jet width 100-400 (mm)
Scope of paints, coatings, household, DIY,
For best results paint spray guns, should:
1 clean the paint surface.
(2) use the correct thickness of the liquid.
Paint preparation:
In order to have the best spray results, you need to use paint to adjust to a certain viscosity. Adjustment method: using the supplied amount of fighting, will need to use the paint bucket full of volume. Note that the emptying time is usually 15-25 seconds. If the time is greater than 25 seconds, shows the paint is too thick, dilute the paint should be. Will need to adjust to the amount of paint used in paint bucket emptying time of 15-25 seconds before use.
3. adjustable spray gun:
a. about the size of a rotating spray regulator adjustable spray the size of the state.
b. Use the spray by counter-clockwise to the maximum size of regulator.
c. Press the power switch on the electric gun, electric gun began to spray after a few seconds
d. the size of clockwise rotation spray regulator, the mist adjust to your desired state
1, the air-degree, all spray paint nozzle and needle holes, never damage
2, each part of your cleaning with a brush dipped in thinner in the cleaning, do not soak the whole gun in the diluent.
3, when cleaning spray a small amount of paint thinner channel.
4, mounted needle valve washer components, so that the valve seals in order not to screw too tight, pull the trigger while your side tightened, so that the valve moves flexible.
In order to have a good spray effect, we must first correct operation of spray gun, hold the gun with spray used to keep it vertical and parallel to the movement, the action must pull the trigger before starting to relax before the end of the trigger action, gun control in order to correct and coatings.
Spray gun and the distance from the surface should be 150mm-200mm, depending on paint and spray pressure and operational needs. Save paint and must keep proper viscosity is not uniform deposition, each coating must be tightly attached to the proper spray overlap in order to obtain consistent results
4, carefully clean the parts when disassembly, not to waste attached to the top
paint zoom, electric paint spray gun can be used in automotive, wood, furniture and other interior coating. Shoulder strap can be easily configured to carry and operate, is a very good little helper.
